Hydrogen carriers: Production,transmission, decomposition,and storage

Recognizing the potential role of liquid hydrogen carriers in overcoming the inherent limitations in transporting and storing gaseous and liquid hydrogen, a complete production and use scenario is postulated and analyzed for perspective one-way and two-way carriers. The carriers, methanol, ammonia and toluene/MCH (methylcyclohexane), are produced at commercially viable scales in a central location, transmitted by rail or pipelines for 2000 miles, and decomposed near city gates to generate fuel-cell quality hydrogen for distribution to refueling stations. In terms of the levelized cost of H₂ distributed to the stations, methanol is less expensive to produce ($1.22/kg-H₂) than MCH ($1.35/kg-H₂) or ammonia ($2.20/kg-H₂). Levelized train transmission cost is smaller for methanol ($0.63/kg-H₂) than ammonia ($1.29/kg-H₂) or toluene/MCH system ($2.07/kg-H₂). Levelized decomposition cost is smaller for ammonia ($0.30–1.06/kg-H₂) than MCH ($0.54–1.22/kg-H₂) or methanol ($0.43–1.12/kg-H₂). Over the complete range of demand investigated, 10–350 tpd-H₂, the levelized cost of H₂ distributed to stations is aligned as methanol « ammonia ~ MCH. With pipelines at much larger scale, 6000 tpd-H₂, the levelized cost decreases by ~1 $/kg-H₂ for ammonia and MCH and much less for methanol. Methanol is a particularly attractive low-risk carrier in the transition phase with lower than 50-tpd H₂ demand.     

概念辨析：建筑评论的思辨实践

建筑评论是一项针对具体对象,将目之所及的事物背后不可视的背景、思想、价值判断、驱动力等,转化为可以言说、可以讨论、具有建筑学和文化社会意义的思辨性活动。[1]这项活动的基础工作之一是概念的辨析与运用。因此,在东南大学建筑学院开设的"建筑评论课",通过课程主题的组织,在帮助学生建立多维批评视野的同时,以概念辨析为切入点,通过基于精读、研究的写作训练,实现思辨性思维的培养、学术素养和写作的培训,以及对建筑评论和中国现当代建筑话语的理解。     

Design and construction of lightweight EPS geofoam embedded geomaterial embankment system for control of settlements

This paper presents a research study on a bridge site located along US highway 67 over SH 174 in Cleburne, Texas, where bridge approach slabs have experienced more than 0.4 m (17 in.) of settlement within a span of 16 years after construction. Many treatment methods attempted to mitigate this problem had proven to be ineffective. As part of novel rehabilitation works, the top of existing fill soil on the embankment was replaced with lightweight expanded polystyrene (EPS) geofoam blocks to alleviate the approach slab settlements. This paper describes initial design and construction details of the rehabilitation works performed on the embankment system along with a focus on the early performance details. Field monitoring studies were conducted for almost three years to study the bump/settlements under the EPS geofoam embankment system. Short term measured settlement data was analyzed with hyperbolic model to predict the long term settlements. Numerical finite element studies attempted in this study showed that settlements could be reasonably predicted by modeling these geofoam embankments. Based on the monitoring and modeling studies, the effectiveness of utilizing EPS geofoam as an embankment fill material was addressed to mitigate the differential settlements under a bridge approach slab.     

Doping manganese into CsPb(Cl/Br)3 quantum dots glasses: Dual-color emission and super thermal stability

CsPbX₃ (X = Cl, Br, I) perovskite quantum dots (QDs) represent bright and tunable photoluminescence, it is regrettable that the air instability and poor water resistant properties prevent their application in optoelectronic devices. At the same time, the toxicity of lead is also a major factor restricting its development. As a consequence, we demonstrate the partial replacement of Pb with Mn through conventional melt-quenching and heat-treatment method preparation of Mn-doped CsPb(Cl/Br)₃ QD glass. Mn-doped CsPb(Cl/Br)₃ QD glass exhibits high luminescent intensity like QDs. It is important that Mn-doped CsPb(Cl/Br)₃ QD glass with Dual-Color maintained the same lattice structure like Mn-doped CsPb(Cl/Br)₃ QDs, and highly homogeneous spectral characteristics of Mn luminescence. The intensity and position of this Mn-related emission are also tunable by altering the experimental parameters, such as the Pb-to-Mn feed ratio, annealing temperature. More importantly, the as-prepared orange Mn-doped CsPb(Cl/Br)₃ QD glass was employed to fabricate white LEDs combined with a commercial Ce³⁺:Y₃Al₅O₁₂ phosphor-in-glass (Ce-PiG) on top of a InGaN blue chip. And the constructed WLEDs generate a warm white with an optimal luminous efficacy (LE) of 67.00 lm/W, a high CRI of 81.4, and a low CCT of 4902 K.     

Energy analysis of the system of two-stage anaerobic processing of liquid organic waste with production of hydrogen- and methane-containing biogases

In recent years, public attention has been increasingly attracted to solving two inextricably linked problems - preventing the depletion of natural resources and protecting the environment from anthropogenic pollution. The annual consumption of livestock waste for biogas production is about 240 thousand m³ per year, which is 0.17% of the total manure produced at Russian agricultural enterprises. At present, the actual use of organic waste potentially suitable for biogas production is 2–3 orders of magnitude lower than the existing potential for organic waste. Currently, hydrogen energy is gaining immense popularity in the world due to the problem of depletion of non-renewable energy sources - hydrocarbons, and environmental pollution caused by their increasing consumption. Of particular interest is the dark process of producing hydrogen-containing biogas in the processing of organic waste under anaerobic conditions, which allows you to take advantage of both energy production and solving the problem of organic waste disposal. An energy analysis of a two-stage anaerobic liquid organic waste processing system with the production of hydrogen- and methane-containing biogases based on experimental data obtained in a laboratory plant with increased volume reactors was performed. The energy efficiency of the system is in the range of 1.91–2.74. Maximum energy efficiency was observed with a hydraulic retention time of 2.5 days in a dark fermentation reactor. The cost of electricity to produce 1 m³ of hydrogen was 1.093 kW·h with a hydraulic retention time of 2.5 days in the dark fermentation reactor. When the hydraulic retention time in the dark fermentation reactor was 1 day, the specific (in ratio to the processing rate of organic waste) energy costs to produce of 1 m³ of hydrogen were minimal in the considered hrt range, and amounted to 26 (W/m³ of hydrogen)/(m³ of waste/day). Thus, the system of two-stage anaerobic processing of liquid organic waste to produce hydrogen and methane-containing biogases is an energy-efficient way to both produce hydrogen and process organic waste.     

杭州湾南岸滩涂沉积物中HCHs与DDTs污染特征分析

摘 要：目的 了解六六六（hexachlorocyclohexanes,HCHs）与滴滴涕(dichloro diphenyl trichloroethanes,DDTs)在杭州湾南岸滩涂沉积物中的污染现状。方法 于2018年4月，采集杭州湾南岸地区4个采样点不同深度（0~80 cm）滩涂沉积物，利用气相色谱-串联质谱法（gas chromatography tandem mass spectrometry, GC-MS/MS）测定了该区域中HCHs与DDTs的含量，对其分布规律进行分析，使用共识沉积物质量基准法对其生态学风险进行了评估。结果 所有样品中均检出，HCHs与DDTs含量分别为4.20~6.24 μg/kg与3.37~4.73 μg/kg，主要以β-HCH、δ-HCH以及DDE为主，其污染主要来源于历史性工业品，整体污染处于较低水平；20.3%的沉积物样品中DDEs含量以及28.1%的样品DDTs总量介于阈值效应浓度(threshold concentration, TECs) 和可能效应浓度(probable effect concentration, PECs)之间。结论 杭州湾南岸沉积物中HCHs与DDTs的污染处于较低水平，具有较小的生态学风险。     

基于柠檬酸-铕纳米配位聚合物构建荧光探针快速检测汤煲中5’-肌苷酸含量

基于柠檬酸-铕金属有机纳米配体聚合物（citrate/europium lanthanide coordination polymer nanoparticles，Cit/Eu LCP NPs）构建快速检测肉品汤煲中5’-肌苷酸（inosine-5’-monophosphate，5’-IMP）的荧光探针。研究结果表明，5’-IMP对Cit/Eu?LCP?NPs有良好的荧光猝灭作用。在最佳条件下，该荧光探针在5’-IMP?2.5～200?μg/mL的质量浓度范围内呈现出良好的线性关系，检出限为0.17?μg/mL，且具备良好的抗干扰、稳定性和重复性。为了验证方法可行性，将该方法应用于实际鸡汤样品中的5’-IMP检测，测得加标回收率为97.85%～103.95%，可为快速检测肉品汤煲中5’-IMP提供新的思路和方法。     

Damage evolution in polymer due to exposure to high-pressure hydrogen gas

The use of hydrogen as a fuel is increasing exponentially, and the most economical way to store and transport hydrogen for fuel use is as a high-pressure gas. Polymers are widely used for hydrogen distribution and storage systems because they are chemically inert towards hydrogen. However, when exposed to high-pressure hydrogen, some hydrogen diffuses through polymers and occupies the preexisting cavities inside the material. Upon depressurization, the hydrogen trapped inside polymer cavities can cause blistering or cracking by expanding these cavities. A continuum mechanics–based deformation model was deployed to predict the stress distribution and damage propagation while the polymer undergoes depressurization after high-pressure hydrogen exposure. The effects of cavity size, cavity location, and pressure inside the cavity on damage initiation and evolution inside the polymer were studied. The stress and damage evolution in the presence of multiple cavities was also studied, because interaction among cavities alters the damage and stress field. It was found that all these factors significantly change the stress state in the polymer, resulting in different paths for damage propagation. The effect of adding carbon black filler particles and plasticizer on the damage was also studied. It was found that damage tolerance of the polymer increases drastically with the addition of carbon black fillers, but decreases with the addition of the plasticizer.     

Techno-economic analysis of hydrogen energy for renewable energy power smoothing

With the increasing proportion of renewable energy (mainly wind power and photovoltaic) connected to the grid, the fluctuation of renewable energy power brings great challenges to the safe and reliable operation of power grid. As a clean, low-carbon secondary energy, hydrogen energy is applied in renewable energy (mainly wind power and photovoltaic) grid-connected power smoothing, which opens up a new way of coupling hydrogen storage energy with renewable energy. This paper focuses on the optimization of capacity of electrolyzers and fuel cells and the analysis of system economy in the process of power output smoothing of wind/photovoltaic coupled hydrogen energy grid-connected system. Based on the complementary characteristics of particle swarm optimization (PSO) and chemical reaction optimization algorithm (CROA), a particle swarm optimization-chemical reaction optimization algorithm (PSO-CROA) are proposed. Aiming at maximizing system profit, the capacity of electrolyzers and fuel cells are constrained by wind power fluctuation, and considering environmental benefits, government subsidies and time value of funds, the objective function and its constraints are established. According to the simulation analysis, by comparing the calculated results with PSO and CROA, it shows that PSO-CROA effectively evaluates the economy of the system, and optimizes the optimal capacity of the electrolyzers and fuel cells. The conclusion of this paper is of great significance for the application of hydrogen energy storage in the evaluation of power smoothness and economy of renewable energy grid connection and the calculation of economic allocation of hydrogen energy storage capacity.     

Theoretical investigation of solvent effects on the selective hydrogenation of furfural over Pt(111)

It was well known that solvent effect plays a very important role in the catalytic reaction. There are many theoretical studies on the solvent effect in homogeneous catalysis while there are few theoretical studies on the solvent effect in the heterogeneous catalytic reaction and there has been no work to investigate the solvent effect on furfural transformation in heterogeneous catalysis. In the present work, both the density functional calculations and the microkinetic analysis were performed to study the selective hydrogenation of furfural over Pt(111) in the presence of methanol as well as toluene and compared with that in the gas condition. The present results indicated that the methanol can enhance the adsorption strength of furfural and other oxygen-containing reaction species due to its relatively strong polarity properties and this can be a main reason for solvent-induced high activity and selectivity. Another reason is that reaction paths study showed that the presence of methanol solvent makes the dehydrogenation of furfural less thermochemical due to the fact that furfural is more stabilized than that of dehydrogenation species, and methanol also has an inhibition effect on the dehydrogenation of furfural in the kinetic aspect, and further energetic span theory proves highest activity and selectivity for hydrogenation in methanol solvent of vapor, methanol and toluene. Moreover, microkinetic model simulation demonstrated that the activity and selectivity of hydrogenation in methanol is both higher than that in vapor and toluene. The much higher activity in methanol is due to the stabilized adsorbed reactants in the surface, which leads to a higher surface coverage of furfural. It might be proposed based on the present work that a solvent with relatively strong polarity may be favorable for the high selective hydrogenation of furfural.